Operation
BOMAG
27
BP 20/50, BP 25/50
Fig. 22
l
Pull the rope by the starter handle quickly and
powerful as far out as possible (Fig. 22).
!
Caution
Do not let the starter handle hit back against
the engine.
l
If the engine does not start during the first at-
tempt, repeat the starting process.
Fig. 23
l
As the engine warms up open the lever (Fig.
23) of the choke bit by bit.
Fig. 24
l
Move the throttle lever (Fig. 24) back to idle
speed position.
l
Run the engine warm for approx. 1 to 2 min-
utes in idle speed.
i
Note
Operation of the vibratory plate can be started as
soon as the engine responds to short throttle com-
mands.
!
Caution
When the engine is running leave the ignition
switch in position "I".
Fig. 25
l
If the engine stops again after approx. 3 to 5
seconds, close the choke again with the lever
(Fig. 25) and repeat the starting process.
Go
to
Discount-Equipment.com
to
order
your
parts
