manualshive.com logo in svg

Fayat Group BOMAG BP 20/50, Operating Instructions Manual

Share
Download
Fayat Group BOMAG BP 20/50 Operating Instructions Manual Download Page 22

 Operation

BOMAG

25

BP 20/50, BP 25/50

4.3

Mounting the steering bow

Fig. 16 

l

Force the steering bow (Fig. 16) apart and 
plug it onto the bracket.

l

After attaching the steering bow secure on 
both sides with spring-type cotter pins.

4.4

Starting the engine 

!

Danger

Exhaust gases are highly dangerous!

Always ensure an adequate supply of fresh air 
when starting and operating in closed rooms 
and trenches!

!

Danger

Danger of accident!

Before starting make sure that there are no 
persons in the danger area of engine or ma-
chine and that all safety installations are in 
place.

Always hold on to the machine. The machine 
moves immediately after starting.

Always keep an eye on a running machine.

!

Danger

Loss of hearing!

Wear your personal noise protection means 
(ear defenders) before starting operation.

Fig. 17 

l

Open the fuel cock (Fig. 17) by turning in direc-
tion of arrow to the end stop.

Go 

to 

Discount-Equipment.com 

to 

order 

your 

parts

Summary of Contents for BOMAG BP 20/50























































Reviews:

No comments

Brands by name

Popular brands

Load more brands