FAVORIT W-82 HP, User Manual

Page: 23 / 149

EN - 19
5.2.3. Selection Stand By
After 15 minutes without user action in
selection mode, machine goes to energy-
saving mode due to decrease energy
consumption. In this model, “- - - “ must
blink with 0,5 sec ON, 3 sec OFF during
energy-saving mode. At the energy saving
mode, “- - - “ led luminosity is reduced. To
restart the machine it will be necessary to
move selector to OFF and select again the
program
5.2.4. Programme Progress
During the Programme
If you open the door when the programme
is running, the product will switch to standby
mode. Once the door has been closed,
press the Start/Pause key to resume the
programme.
Do not open the loading door when the
programme is running. If you have to open
the door, do not keep it open for a long
time.
Programme End
Once the programme is over, the warning
LEDs for Start/Pause, water tank level, filter
cleaning and heat exchanger cleaning will
turn on. Additionally, an audible warning
will be given at the end of the programme.
You can remove the laundry to make the
machine ready for a new load.
IMPORTANT:
Clean the lint filter after
every programme. Empty the water tank
after every programme.
IMPORTANT:
If you do not take out the
laundry after the programme has ended, the
1-hour Anti Crease phase will automatically
be activated. This programme rotates the
drum at regular intervals to prevent creases.
5.3. Drum Light Information
• This product includes LED Drum Light.
• The light works automatically when you
open the door. And closes itself after a while
automatically.
• It is not an adjustable option for user to
open or close it.
• Please do not try to replace or modify the
LED Light.