FAVORIT 12000 BTU, User Manual

Page: 198 / 212

34
The operating of the favorite function
with other modes and functions;
• When the favorite function is en-
abled, if either ECO or Sleep func-
tion is operated, the Favorite Func-
tion becomes disabled.
• When ECO and Sleep functions are
enabled, you may save the setting
that you prefer, as your favorite set-
tings.
• When the Sleep function is active,
the favorite function does not oper-
ate. The new settings can be saved
by only pressing the button for
a long time.
• When the Sleep and Favorite func-
tion operate together, the Favorite
Function becomes cancelled by the
cancellation of the Sleep mode.
• When the closing function is ter-
minated or cancelled, the Favorite
Function will be terminated too.
• In case that the customer changes
the time in the Closing function; the
Favorite function remains in use..
Self Cleanning Function
button allows your air conditioner
to clean up the exchanger and dry the
water accumulated on the indoor unit
exchanger due to condensation of air
when you turn off your air conditioner
in cooling and dehumidification modes.
This function starts as you turn off your
air conditioner and the fan works for 15
minutes. The drying function does not
run in the heating mode.
SC
letters will
be appeared on the display
WARNING: When the function is ac-
tive, do not try to turn the blade on the
air outlet, it will be turned off automati-
cally�
I Feel Function
With the button, you can adjust
the room temperature according to the
temperature at the location of the re-
mote. Your air conditioner sets the tem-
perature at the location of the remote
as the desired temperature and oper-
ates according to this information. It will
suffice to put your remote at a location
where it can communicate with your air
conditioner directly. In the sense mode,
the remote control and the air condi-
tioner communicate every 4 minutes. If
the communication is interrupted for 10
minutes, the environment sensor on the
air conditioner enables. When the com-
munication is provided again, the sensor
on the remote control will be enabled
and the function will continue to operate
until you cancel it.
Reset Function
By pressing the button, you can can-
cel all personal settings in your remote
and operate your air conditioner with de-
fault settings.
Display Light Button
You can turn off the light of the indoor
unit with (* ) button if it makes
you uncomfortable. Display light will be
turned on when you turn on the air con-
ditioner again. Display will be turned on
automatically when you press any button
on the remote and it will be turned off in
a short time.