FAVORIT 12000 BTU, User Manual

Page: 186 / 212

22
Installing and Replacing
Remote Control Batteries
If there is a communication error with your
air conditioner or if symbols do not appear
on the display when you press the buttons
on the remote control, you may need to re-
place the batteries. Use two AAA type, 1.5
V alkaline batteries, do not use rechargeable
batteries. Open the battery compartment
lid by sliding it in the direction of the arrow.
Place the two AAA 1.5 battery in their slots
while paying attention to match the (+) and
(-) polarity markings correctly, then close
again the lid. (+) and (-) polarity markings of
the batteries are shown in the battery com-
partment of the remote control.
Points to Take into
Consideration While Using
the Remote Control
In order to use your air conditioner effec-
tively and efficiently by means of your re-
mote, keep the following points in mind:
• Point the remote control towards the
signal receiver on the air conditioner.
The remote should at most be 6 meters
away from the air conditioner.
• There should not be any obstacle be-
tween the remote and the receiver.
• Do not drop or throw the remote con-
trol.
• If you do not hear a signal (beeping)
sound when you press the remote but-
tons, the signal is not received. In order
to make your air conditioner communi-
cate better with the remote control, po-
sition yourself in a closer and straighter
way. Make sure to not to turn the signal
sound off. See (Signal sound cancella-
tion)
• Do not put the remote under sunlight
or next to any heat source.
Operating Your Air
Conditioner without Remote
Control
If your remote gets lost or become unus-
able, you can operate your air conditioner
directly from the indoor unit.
Push the front casing of the indoor unit from
right and left-hand sides and lift up. Turn on
the air conditioner by pressing the button
on the right-hand side. When you press the
button, the operation display lights up and
the air conditioner starts running in the most
appropriate mode for room temperature. To
turn off the air conditioner press the on/off
button again. When you turn it on with the
on/off button, the air conditioner starts to
operate in the automatic mode.
On/off button