5
Safety Precautions
Do not us e the projector under direct s unlight.
Please avoid looking directly into the projector’s lens while the unit is
operating. Doing so could damage your eyes.
Do not use this projector near sources of heat, such as space heaters,
Do not block any ventilation holes on this device.
Using a tripod with your projector is strongly recommended. A tripod
will allow for better ventilation and heat dissipation.
Do not allow liquids to come into contact with this projector. If the
projector is exposed to liquids, the internal electronics may be
damaged.
This projector should not be used at tempatures above 104°F or below
40°F. Relative humidity should
be less then 80%
This projector should not be used in a dusty location. Large amounts of
dust may hinder the projector’s ventilation, causing it to overheat.
Please avoid dropping, hitting or throwing this projector.
Please make sure your projector is placed on a steady surface prior to
operating it.
Please do not operate the projector at a high volume for an extended
to the projector’s audio output jack for situations where a high
volume is needed.
Upon powering down, the projector’s cooling fan will continue to spin
for up to 30 seconds. Please do not unplug the projector until after
the cooling fan stops spinning.
