ENGLISH
13.
F
OOTBALL
13.1
P
ROGRAMMING
THE
P
ARAMETERS
Press the keys
: see section 4.1 to select the sport and change the following parameters:
1. Three
game times
(A, B, C): duration [0-99 minutes : 0-59 seconds] and count up or down [ - ].
2. Three
interval times
(D, E, F): duration [0-99 minutes : 0-59 seconds] and count up or down [ - ].
3.
End of interval warning sound
(D, E, F): time left in the period [0-99 minutes: 0-59 seconds]; set to zero to deactivate
it.
4.
End of game sound effect
: duration [0-4 seconds].
13.2
S
ETTING
P
OINTS
The main points and fouls menu is accessed by pressing the keys
. The team points can be changed quickly
by using the red keys [
,
,
,
].
To modify the current game data, press the keys
: the following functions appear.
Changes the current team score:
•
using the alphanumeric keys, enter the new score [0-99] and confirm by pressing
.
13.3
G
AME
AND
I
NTERVAL
TIMES
The current game or interval time is displayed on the Console screen in minutes, seconds and tenths of a second; the
following appear below this in smaller characters:
•
the time loaded at the start,
•
the type of count, up [ ] or down [ ],
•
a ' ' or ' ' to indicate whether it is showing the game (
G
ame) or the interval (
P
ause).
To start, stop and restart the timer, use the special console (
Item 232
:
Time Console-02
, see section 1.3), or press the key
Game-clock
.
In the sport setup menu, the sound can be set to go before the end of the interval as well as at the end of the game.
To load or change the game time, press the keys
and then use the following multi-function keys.
These keys load the game time with one of the three programmed values (shown in parentheses)
in the sport setup menu.
Changes the current game time:
•
using the alphanumeric keys, enter the minutes [0-99] and then confirm by pressing
;
•
then repeat these steps to enter the seconds [0-59].
Switches the time count mode from increasing [ ] to decreasing [ ] and the other way around.
Loads the time (game or interval) that comes after the current period from the sequence of periods defined in the
setup menu (see section 4.5).
Loads the period of time (game or interval) that comes before the current period in the sequence of periods defined
in the setup menu.
To load or change the interval time, press the key
followed by
and then use the following multi-function keys.
These keys load the interval time with one of the three programmed values (shown in
parentheses) in the sport setup menu.
Changes the current interval time:
•
using the alphanumeric keys, enter the minutes [0-99] and then confirm by pressing
;
•
then repeat these steps to enter the seconds [0-59].
Switches the time count mode from increasing [ ] to decreasing [ ] and the other way around.
230-M05-EN Console-320 Handbook
Page 25/ 27
FAVERO ELECTRONIC DESIGN
