2
1
Install the removed accessories in the opposite
sequence.
CATALYTIC CLEANING
The cavity with a catalytic coating is self-cleaning. It
absorbs fat.
Before you turn on the catalytic cleaning:
• remove all the accessories and removable shelf
supports.
• clean the oven floor with warm water and mild
detergent.
• clean the inner door glass with warm water and
soft cloth.
1. Set the function .
2. Set the oven temperature to 250 °C and let the
oven operate for 1 hour.
3. Turn off the oven.
4. When the oven cools down, clean the cavity
with a wet soft cloth.
Spots or discolouration of the catalytic coating
have no effect on Catalytic cleaning.
REMOVING AND INSTALLING DOOR
The oven door has two glass panels. You can
remove the oven door and the internal glass panel
to clean it.
The oven door may close if you try to
remove the internal glass panel before
you remove the oven door.
CAUTION! Do not use the oven
without the internal glass panel.
1. Open the door fully and hold both hinges.
2. Lift and turn the levers on both hinges.
3. Close the oven door halfway to the first
opening position. Then pull forward and remove
the door from its seat.
4. Put the door on a soft cloth on a stable surface.
18
