FAURE FOA25701XU, User Manual

Page: 17 / 24

Food Function
Accesso-
ries
Shelf
position
Temper-
ature
(°C)
Time (min) Comments
Beef
burger
6 pieces,
0.6 kg
Grilling Wire
shelf and
dripping
pan
4 max. 20 - 30 Put the wire shelf
on the fourth level
and the dripping
pan on the third
level of the oven.
Turn the food half-
way through the
cooking time.
Preheat the oven
for 3 minutes.
CARE AND CLEANING
WARNING! Refer to Safety chapters.
NOTES ON CLEANING
Clean the front of the oven with a soft cloth with
warm water and a mild cleaning agent.
To clean metal surfaces, use a dedicated cleaning
agent.
Clean the oven interior after each use. Fat
accumulation or other food remains may result in a
fire. The risk is higher for the grill pan.
Clean all accessories after each use and let them
dry. Use a soft cloth with warm water and a
cleaning agent. Do not clean the accessories in the
dishwasher.
Clean stubborn dirt with a special oven cleaner. Do
not apply oven cleaner on the catalytic surfaces.
If you have nonstick accessories, do not clean them
using aggressive agents, sharp-edged objects or a
dishwasher. It can cause damage to the nonstick
coating.
Moisture can condense in the oven or on the door
glass panels. To decrease the condensation,
operate the oven for 10 minutes before cooking.
Clean the moisture from the cavity after each use.
STAINLESS STEEL OR ALUMINIUM OVENS
Clean the oven door with a damp cloth or sponge
only. Dry it with a soft cloth.
Do not use steel wool, acids or abrasive materials
as they can damage the oven surface. Clean the
oven control panel with the same precautions.
CLEANING THE DOOR GASKET
Regularly do a check of the door gasket. The door
gasket is around the frame of the oven cavity. Do
not use the oven if the door gasket is damaged.
Contact an Authorised Service Centre.
To clean the door gasket, refer to the general
information about cleaning.
REMOVING THE SHELF SUPPORTS /
CATALYTIC PANELS
To clean the oven, remove the shelf supports /
catalytic panels.
CAUTION! Be careful when you
remove the shelf supports. The
catalytic panels are not attached to the
oven walls and can fall out when you
remove the shelf supports.
1. Pull the front of the shelf support away from the
side wall. Hold the rear shelf runners and
catalytic panel in place with the other hand.
2. Pull the rear end of the shelf support away from
the side wall and remove it.
17