FAURE HERMAN FH8400, User Manual

Page: 40 / 111

F H 8 4 0 0
38
38 38
38 TEC 07.07.04/ 412521
Revision index F
08/07/2013
The first two parameters are displayed alternately.
Flow rate and volume are displayed permanently.
Remark : temperature and pressure inputs are only optional.
General parameter setting procedure
From the local display, enter the parameter setting mode by
pressing the Enter key of the remote control device.
Use the
↑
and
↓
keys for selecting a sub-menu or a parameter.
The selected option is indicated by an arrow
→
on the left of the
item. The parameters stored in the FH8400 are indicated by a *
character.
For the numerical values, select the value of each digit separately.
(The sign is modified by means of the
↓
and
↑
keys).
Press the Enter key to validate the selected parameter or value.
Remark: Each parameter setting screen includes an "Exit" line and a
"Stop" / "Start" line. (The "Stop" / "Start" line is displayed only when
the FH8400 is in non custody transfer mode.)
The "Exit" Line allows to return into the measure mode display.
The "Stop" / "Start" line allows to stop and restart the meter. (The
stopping and restarting of the meter are recorded in the Event logger.)