FAURE HERMAN FH8400, User Manual

Page: 15 / 111

ATEX recommendations
13
13 13
13
Installation
WARNING: This equipment is suitable in hazardous area complying with the indications specified on its nameplate (Hazardous
location information, operating conditions and restrictions, specific installation …).
CAUTION: Handle the equipment with care and Select a mounting location so that the equipment will not be subjected to
impact by heavy objects. Impacts can damage the equipment.
WARNING: Electrical power must be "OFF" before and during installation.
WARNING: The equipment shall be installed by means of the suitable tools. Never use a hammer or impact wrench.
WARNING: If this equipment is supposed to be connected to other devices, verify that the protection systems are compatible.
Maintenance
WARNING: Electrical power must be "OFF" before and during Maintenance.
WARNING: Always disconnect primary power source before opening equipment for inspection or service.
WARNING: Maintenance operation shall be done by means of the suitable tools. Never use a hammer or impact wrench.
Frequent inspection should be made. A schedule for maintenance checks should be determined by the environment and
frequency of use.
Perform visual, electrical and mechanical checks on all components on a regular basis.
Visually check for undue heating evidenced by discoloration of wires or other components, damaged or worn parts or leakage
evidenced by water or corrosion in the interior.
Electrically check to make sure that all connections are clean and that the device is operating properly.
For specifically installation and maintenance advices, contact FAURE HERMAN After Sales Department:
FAURE HERMAN
Route de Bonnétable – 72400 LA FERTE BERNARD
+33 (0)2 43 60 28 80 - +33 (0)2 43 60 28 89
fhservices@idexcorp.com
Don’t forget to give us your equipment serial number.