FAURE HERMAN FH8400, User Manual

Page: 4 / 111

F H 8 4 0 0
2
2 2
2 TEC 07.07.04/ 412521
Revision index F
08/07/2013
Attention!
This manual contains important instructions and important warnings. It is essential to
read and apply it before commencing installation, connection, and commissioning
work.
Failure to observe these instructions and warnings may damage the flowmeter and
endanger persons.
Qualification and training of the personnel
The flowmeter must be installed and maintained by personnel trained and
qualified for this work.
Hazards arising from failure to observe the instructions and warnings
Failure to observe these instructions and warnings may:
•
Endanger personnel as a result of mechanical, electrical, or chemical
problems,
•
Damage the flowmeter,
•
Pollute the environment by releasing hazardous substances.
Safety at work
The safety instructions appearing in this manual must be observed, as must all
accident prevention and occupational safety regulations in force in the country
of installation.
Safety instructions
Disconnect the power supply and depressurize the flowmeter before servicing
(prevention of electrical hazards and hazards created by pressurized
equipment).
Conditions of operation
The reliability of the flowmeter is guaranteed only if it is installed and used as
described in this manual. The extreme conditions of use indicated on the data
plate must not be exceeded.