External Connections
CPB902
C P B 9 0 2 U s e r M a n u a l
19
© 2 0 0 8 F a s t w e l v . 1 . 5 b E
Figure 3.2:
Cables 3 and 4 (Fig. 3.1) Connection for Console Operation
1
2
3
4
5
6
7
8
9
DB9
PC COM- port
1
2
3
4
5
6
7
8
9
DB9
TXD
RXD
GND
Null-Modem Cable
DB9
IDC10
IDC10-DB9 Adapter Cable
CPB902 Connec tor J 4
The Hyperterminal program running on the PC to support console operation should have the
following settings:
Transfer rate – 115200 bit/s
Data bits –
8
Stop bits –
1
Parity check – Off
As the module is switched on and BIOS is loaded, the screen displays information described in
3.2.1
CompactFlash Cards Installation
CompactFlash socket of CPB902 (J2) supports any 3.3 V or 5 V CompactFlash ATA type I/II cards.
Carefully slide in the correctly oriented card and gently press to engage the contacts completely.
To disengage the card, use the ejector button.
Note:
Connection of the CompactFlash cards while the power is on may
damage your system.
CompactFlash socket description can be found in
.
3.2.2
USB Devices Connection
The CPB902 can accept Plug&Play connection of USB 1.1 computer peripheral devices (printers,
keyboards, mice, etc.) All USB devices may be connected or disconnected while the host power is
on.
