15
Wire installation method
Wire with ferrule installation method
Wire insertion slot shape
Before inserting a wire or ferrule, check the shape of the wire insertion port below and the diameter and
orientation of the wire or ferrule.
Inserting a wire or ferrule larger than the wire insertion port shown below may damage the terminal block.
1. Press the open/close key (orange) of the wire insertion port
for installation with a precision flathead screwdriver.
2. Insert the wire from the wire insertion port while pressing the
open/close key. Insert the wire until the tip reaches the
bottom.
3. Release the open/close key to complete wiring. Pull gently to
make sure it does not come loose.
Power terminal block
* For device terminal blocks, insert in the
same way.
1. Insert the wire with the ferrule attached through the wire
insertion port. Insert the ferrule until the tip of the ferrule
reaches the bottom.
(In the case of ferrule, it can be inserted without pressing the
open/close key.)
2. Insert it until it reaches the bottom and the wiring is complete.
Pull gently to make sure it does not come loose.
Power terminal block
* For device terminal blocks, insert in the same
way.
Ramco Innovations www.optex-ramco.com (800) 280-6933