Fastech Ezi-SERVOII, User Manual, Page: 8 / 108

Check the product
Warning
Check the product is damaged or parts are missing. Otherwise, the machine may get damaged or
the user may get injured.
Installation
Warning
Carefully operate the product. Otherwise the product may get damaged or user’s foot may get
injured by dropping the product.
Use non-flammable materials such as metal in the place where the product is to be installed. Oth-
erwise, a fire may occur.
When installing several units of FASTECH Co., Ltd.’s products in a sealed place, install a cooling
fan to keep the ambient temperature as 50°C or lower. Otherwise a fire or other kinds of accidents
may occur due to overheating.
Danger
The process of installation, Connection, Operation, Checking and Repairing should be done with
qualified person.
Connect Cables
Warning
Keep the rated range of input voltage of the drive. Otherwise, a fire or other kinds of accidents may
occur.
Please follow the wiring diagram for cable connection. Otherwise, a fire or other kinds of accidents
may occur.
Danger
Before connecting cables, please check if input power is OFF. Otherwise, a fire or other kinds of
accidents may occur.
The case of Ezi-SERVOII EtherCAT TO is insulated from the ground of the internal circuit by the
condenser so please ground the product. Otherwise, an electric shock or a fire may occur.
Operation and Setting
Warning
If a protection function (alarm) occurs, firstly remove its cause and then release (alarm reset) the
protection function. If you operate continuously without removal of root cause, the machine may
get damaged or the user may get injured.
Make all input signals to OFF before supply input voltage to drive. Motor will run then the machine
may get damaged or the user may get injured.
All parameter values of Ezi-SERVOII EtherCAT TO are set by default factory setting value. Change
this value after reading this manual thoroughly. Otherwise, the machine may get damaged or other
kinds of accidents may occur.
Rev.37
FASTECH Co., Ltd.
8