Fastech Ezi-Servo ALL, User Manual, Page: 66 / 100

6.6. Input Signal
www.fastech.co.kr
66
6.6.13 JPT(Jump Position Table) Start input
To select motion pattern(position table number) to be subsequently executed according to input
signal conditions. The difference from Paragraph
「
6.6.12
‘JPT Input0~Input2 Input
」
is:
1) PT number to be jumped must be composed to 10XXX;
2)
Next motion is not executed until ‘JPT Start’ is set to ON. If ‘Wait Time’ value of PT data is
more than ‘0’, the time lapses additionally and then next motion is executed.
【
Example
】
Data of PT 14
* Ezi-SERVO ALL-28 is not support this function
.
PT number … Wait Time JP Table No JPT 0 JPT 1 JPT 2
14 … 500 10015 10115 10116 10255