Troubleshooting
SK550 1.1
V. 2.0
21
5
Troubleshooting
5.1
General troubleshooting procedure
1. Try to solve the problem with the information in this manual.
See
.
2. If it is not possible to solve the problem with the information in
this manual, contact service. See
5.2
Contact service
1. Find the type plate on the rear of the machine. See
2. Take a note of the model number and the serial number of the
machine.
3. Contact your supplier or manufacturer.
See
www.fast-fluid.com
.
5.3
Error messages and other faults
Note
See the column
Possible solution
to solve the
problem. When the problem persists, contact
service. See
.
Problem
Possible cause
Possible solution
The display shows ‘E01’
The door is open.
Close the door. See
The display shows ‘E08’
Emergency stop switch is pressed
during running state.
Release the emergency stop switch.
See
.
The display shows ‘E11’
The can is missing.
Place the can. See
The display shows ‘E50’ to
‘E99’
Inverter is in error mode.
Reset the machine. See
The display shows user ID
code ‘0000’, but you have
chosen another user ID
code
The wrong user ID code is chosen. Contact service. See
.