Installation
SK550 1.1
V. 2.0
19
1. Push the machine to the final location.
2. Connect the power cable to the net entry.
3. Connect the power cable to the wall socket.
4.2.3
Level the machine
1. Move down the adjustable feet (A) until the wheels (B) are off
the ground.
2. Adjust the height of the feet and make sure that the machine
is leveled.
3. Tighten the nuts (C) to lock the feet.
4.3
Finish the installation
1. Turn on the machine. See
2. For first time use, select the user ID code. See
.
4.4
Select the user ID code
WARNING
Mind the minimum requirement of the load
capacity of the floor. See
.
Note
Make sure the final location is well-lit and well-
ventilated.
Note
The power cable is also used as a device to
disconnect the power. Make sure that the power
cable is freely accessible.
A
B
C
17mm
Note
The default user ID code is “0000”.
Note
You can choose a user ID code only one time. If
you have chosen the wrong user ID code, the
machine uses the default user ID code. See
.