Operator manual
SK550 1.1
V. 2.0
12
1. Push any key.
When the machine is on, the display shows the
default shake times.
3.2.3
General shaking procedure
1. Place the can. See
.
2. Start the machine, See
3. Remove the can. See
3.2.4
Placing the can
Open the doors
1. Open the doors (A).
Use the handle (B).
Place the can
1. Put one or more cans (A) in the centre of the can table, or in
a pattern that has its gravitational centre in the middle of the
can table.
Note
The door is unlocked when the display shows
‘READY!’.
A
B
A
A
A
A
A
A
A
1
2
3
4
WARNING
It is possible that the can is heavy. Use the
correct lifting tool when appropriate. Obey the
local regulations.
CAUTION
Make sure that all cans have the same height.
Do not stack cans upon each other.
Note
If the can plate and the can table are too close
to each other, use the Stop/Up key to move the
can plate upwards, see
.