32
Troubleshooting
HA180
V. 2.0
5.3
Error messages and other faults
Note
For all error messages on the computer: see the
help topic in the dispense software.
Note
See the column
Possible solution
to solve the
problem. When the problem persists, contact
service. See
.
Error message / fault
Possible cause
Possible solution
Main power supply is present but
the machine does not work.
The emergency stop switch is
active.
Reset the emergency stop switch.
See
.
A fuse is broken.
Contact service. See
.
Turntable turns slowly.
The top cover is not fully closed.
Close the top cover.
Display shows E01
The machine is not initialized.
Push the computer switch key to
restart the machine. See
Display shows E13
A turntable timeout occurred.
Push the computer switch key to
restart the machine. See
Display shows E33
A valve timeout occurred.
Push the computer switch key to
restart the machine. See
Display shows E43
A pump timeout occurred.
Push the computer switch key to
restart the machine. See
Display shows E47
The pump is blocked by the
turntable
Push the computer switch key to
restart the machine. See
Display shows E49
The can is missing during the
dispense process.
Place the can. See
. Then
start the process again.
Display shows E63
The switch plate is missing.
Put back the switch plate.
See
Display shows E84
The brush container is missing.
Put back the brush container.
See
.
All other E - errors
-
Restart the machine.