18
Operator manual
GA450
V. 2.2
1. At the same time, push the Program key and the T1, 2 or 3
key.
2. Push the + or - key to adjust the mix time for T1, 2 or 3.
3. To save the new mix time, push the S-key.
4. If you do not want to save the new mix time, push the Stop/Up
key.
3.3
General cleaning: after every operation
1. Clean the machine with a cloth and remove all spilled paint or
other liquid.
3.4
Periodic maintenance: weekly
1. Remove the paint. Refer to
§ 3.6
.
2. Grease the spindles.
3.5
Periodic maintenance: monthly
1. Remove paint and dirty grease. Add new grease.
2. Grease the axle and other sliding parts.
Note
The table shows the default values.
Note
You can adjust the default mix time when the
display shows ‘rdY’.
CAUTION
Do not use cleaning agents based on organic
solvents to clean painted or plastic parts of the
machine.
CAUTION
Do not use cleaning agents based on organic
solvents to clean painted or plastic parts of the
machine.
CAUTION
Do not use cleaning agents based on organic
solvents to clean painted or plastic parts of the
machine.
Summary of Contents for GA450
