Operator manual
GA450
V. 2.2
13
3.2
Operation
3.2.1
Turning on the machine
1. Connect the power cable to the grouned wall socket.
2. Make sure that the emergency stop is released.
3. Set the Main switch to ‘ON’.
When the machine is on, you
hear two ‘beeps’ and the display shows ‘...’.
4. Press the Stop/Up key.
When the machine is operational, the
display shows ‘rdY’.
3.2.2
Turning on the machine when the machine is in hybernation
When the machine is in hybernation, the display shows ‘.’
1. Press the Stop/Up key.
When the machine is operational, the
display shows ‘rdY’.
3.2.3
Normal mix procedure
1. Place the can. See
§ 3.2.4
.
2. Adjust the default mix speed and time, if necessary. See
§
3.2.8
and
§ 3.2.9
.
3. Start the machine, See
§ 3.2.5
.
4. Remove the can. See
§ 3.2.7
.
3.2.4
Placing the can
Pull out the can table
1. Open the door.
2. Pull up the handle (A) to unlock the can table (B).
3. Pull out the can table until you hear a ‘click’.
The can table is
locked.
WARNING
Only push the emergency stop in the case of a safety emergency.
B
A
1
2
Summary of Contents for GA450
