Troubleshooting GA450
V.
2.2
27
5.3.4
Software errors
5.4
Reset after an emergency stop
1. Unlock the emergency stop.
2. Push the Stop/Up key.
When the machine is operational, the
display shows ‘rdY’.
5.5
Start again after a power failure
1. Press the emergency stop button.
2. Reset the machine. See
§ 5.4
.
5.6
Restart the machine
1. Set the main switch to ‘OFF’.
2. Wait 30 seconds.
3. Turn on the machine. See
§ 3.2.1
.
The display shows ‘E55’
Failed to run the mixer motor
backward.
Reset the machine. See
§ 5.4
.
When the problem persists, contact
service. See
§ 5.2
.
The display shows ‘E56’
Failed to stop the mixer motor.
Reset the machine. See
§ 5.4
.
When the problem persists, contact
service. See
§ 5.2
.
The display shows ‘E57’
Failed to brake the mixer motor.
Reset the machine. See
§ 5.4
.
When the problem persists, contact
service. See
§ 5.2
.
The display shows ‘E58’
Failed to stop braking the mixer
motor.
Reset the machine. See
§ 5.4
.
When the problem persists, contact
service. See
§ 5.2
.
The display shows ‘E60’
Failed to send parameter to
inverter.
Reset the machine. See
§ 5.4
.
When the problem persists, contact
service. See
§ 5.2
.
The display shows ‘E61’
Failed to send home command to
inverter.
Reset the machine. See
§ 5.4
.
When the problem persists, contact
service. See
§ 5.2
.
Problem
Possible cause
Possible solution
The display shows ‘F00’
Parameter is not available.
Contact service. See
§ 5.2
.
The display shows ‘F54’
Invalid state value.
Contact service. See
§ 5.2
.
Problem
Possible cause
Possible solution
WARNING
Make sure that the problem is solved before you
reset the emergency stop.
Summary of Contents for GA450
