TEST RUN, ADJUSTMENTS
- 56 -
6.
Test run, adjustments, checks
1. TEST RUN
The engine is now completely reassembled.
Install engine on test bench and carry out test
run. The engine does not require a long time
running-in program. After a ahort run according
to low specifications the engine is ready for
normal operation.
Also the use of special break-in oils or lub. Oil
additives are not recommended.
Note
Running-in instruction :
=> 5 min idle speed, no load
=> 10 min half speed, half load
=> 20 min full speed, nominal load => output setting
!
=> 2 min idle speed for cooling down
During test run check for proper function, un-
usual noise and leakages.
2. Lubrication system, basic info
32W – engines:
A gear pump sucks the oil from the sump and
conveys the oil through the oilfilter to the main
bearing and conrod bearing. Piston, piston pin,
cylinder liner and rocker arms are splash lubri-
cated. Max.oil pressure ( 4,5 bar ) is controlled
by a relief valve ( mounting support of the oilfil-
ter ).
15 / 18W – engines, differences:
Oil strainer instead of oil filter. Oil pump with
integrated pressure relief system.
Note
All engines require heavy duty lub oils of at least
CC, preferably CD quality. ( API classification ).
For correct viscosity and oil change intervalls
refer to
Operating Manual
!
Summary of Contents for 15W Series
