12
12
111628M
Revision date: 09.25.18
1
Assembly Instructions
ASSEMBLE MAIN FRAME: Assemble Frame
Gather the different assembled components and complete the
steps that follow.
Required parts for this procedure:
• (2) Assembled End Support Frames
• Assembled base rails (2) and assembled outer frame tubes (8)
• FA4482B Tek Screws and 100441 Magnetic Nut Setter
ATTENTION:
Install Tek screws as shown.
Review all diagrams for
clarification. ASSISTANTS ARE NEEDED TO ASSEMBLE THE
FRAME. DO NOT ATTEMPT ALONE.
Complete these steps:
1. Gather the two (2) end support frames and two (2) assembled
base rails.
2. With assistance, assemble the frame as shown in the diagram.
Install base rails flush with the ends of the end support frames.
3. Check outside-to-outside dimensions of the assembled base.
Length at 51 1/2"; width at 55 3/4".
NOTE:
If the dimensions are incorrect for the assembled frame,
verify that you have installed the base rails flush with the ends of
the end support base tubes. Also verify that the length of each
assembled base rail is 51 1/2".
4. Take an outer frame tube and slide it onto the support arms of
the end support frames as shown. Assemble main frame from the
bottom and work toward the top.
Install so tube and
2-way fitting are flush.
2
2
55 3/4"
1
3
