13
Revision date: 12.23.15
6
Install Float Bed Liner–continued
10. Move to the remaining corners and repeat the
steps to temporarily secure them to the frame.
7. Repeat the steps to secure the liner material.
8. Check the bottom of the liner for wrinkles and
remove these by working the material toward
the free edge of the liner.
11. While the bed continues to fill, remove any
excess material that touches the ground. Allow
8"-10" to remain for the final steps. It will be
used to pull the liner into final position.
9. Start adding water to the float bed to allow the
water to seat the liner inside the frame.
NOTE:
Once the liner is fully secured, there
should be no tension on the fasteners. Adding
water now helps to achieve that result.
12. Continue filling until bed is half full.
13. Complete the steps to prepare and install the
aluminum retaining strap.
6. Cut the material as needed to allow it to fit
more evenly at the corners.
ATTENTION:
Do not drop any sharp objects
into the bed liner at any time. Contact your
sales representative for products used to
repair damage to the liner if needed.
LINER INSTALLATION—CONTINUED
ATTENTION:
During the installation of the liner, do not drop
any tools or sharp objects into the liner bed. Doing so can
puncture the liner! Exercise caution!
