9
Revision date: 12.23.15
3
Insulate Float Bed Frame
1. Measure and cut the insulation to the
required size.
4. Next, insulate the floor of the float
bed frame by placing the rigid board
insulation into position.
2. Working from inside the frame, install
the insulation panels.
5. Begin at one end and work toward the
other. Level the surface if needed to
create an even base for the liner. Cut
panels to the needed dimensions.
3. Continue this pattern until the ends and
all sides of the frame are insulated.
6. Before installing the liner material,
inspect the bed surface and remove any
debris that could damage the liner.
Insulate the Float Bed Frame
Once the frame is level, use the rigid board insulation to insulate the sides of the frame and the
surface that supports the bed liner. The frame shown in the example below may differ from the actual
frame. Steps to insulate are similar. Use the photos as guides to insulate your float bed frame.
