19
GROWSPAN
™
GOTHIC PRO GREENHOUSES AND SYSTEMS
Revision date: 05.29.19
INSTALL END WALL FRAMING (BACK)
The greenhouse end walls (front and back) are identical
except as noted below and on the end frame diagrams.
If the back wall includes the optional double door kit, repeat
the End Wall Installation procedure and install the framing
for the remaining end wall.
If the back wall
does not
include an optional double door
kit,
consult the end frame diagram
to install the vertical
frame members.
Dashed lines show where additional frame tubes are
installed when the optional double door is not used.
Consult the end frame diagram for additional information.
1. Read the note regarding the installation of optional
accessories at the beginning of the end wall installation
section.
2. Cut the 102897 tubes to the required length and attach
to the end wall framing.
3. Attach the frame supports at the top and bottom as
previous described.
Secure all polycarbonat panels as shown in the diagrams
and photos below.
GLAZING PANEL
8MM POLYCARBONATE
PANEL SPLICE "H" CHANNEL
TEK SCREW
END WALL FRAME TUBE
END WALL FRAME TUBE
TEK SCREW & NEO-BONDED WASHER
Use a Tek screw and washer to secure panel to end wall
frame. Do not crush panel when installing screws.
Diagram shows basic panel installation and fasteners used
to secure polycarbonte panels.
