GROWSPAN
™
GOTHIC PRO GREENHOUSES AND SYSTEMS
22
Revision date: 05.29.19
5. Using the long Tek screws and neo-bonded galvanized
washers to attach the panel to the horizontal cross tube
of the door frame.
DOUBLE DOOR ASSEMBLY (continued)
NOTE:
Attach the panel in the locations shown in the
photo to hold the panel in place while installing the
aluminum profile to the perimeter of the panel.
6. Install aluminum U-Channel profile to all edges of the
polycarbonate panel.
Photo shows the polycarbonate panel installed on
the outside of the door frame and finished with the
aluminum U-Channel profile. Corners are cut at 45°
angles.
To keep the panel and profile in place, the long Tek
screws and neo-bonded galvanized washers are
installed so the screw drills through the longer edge of
the U-profile (underside of the polycarbonate panel)
and the washer overlaps the shorter edge of the
U-profile (top) as shown above.
7. Repeat the above steps to attach the polycarbonate
panel and to install the aluminum profile to the
remaining door frame.
8. After assembling both doors, evenly space the hinges
along the door frame of each door and attach the
hinges to the assembled doors using the short Tek
screws.
9. With the hinges attached to the doors, use the short
Tek screws to attach the doors to the frame of the end
wall.
Locations of door hinges may vary.
