The Stortford Grow House
7705
Instructions for Use
Please read and retain these instructions for future reference
v003: 06/04/17
1.
Insert either end of tube (1) into connectors
(E).
2.
Insert tube (4) into each connector (E) on
the end of tube (1).
3.
On the end of both these tubes add the
connector (D). Repeat this process and
connect both parts with tube (2) to form the
base.
4.
Insert tube (3) into each of the 8 connectors.
5.
Add connector (E) to each tube and insert
tube (3) vertically only.
6.
Insert tube (2) horizontally to make the shelf
supports.
7.
Insert tube (3) into the 8 connectors as
before, add connector (E) to 3 of the tubes
on each side, add connector (d) to the two
remaining tubes.
8.
Insert tube (2) as before to join the
structure.
9.
Insert tube (3) into the 3 (E) connectors on
each side and add connector (A) to the two
tubes at the front of the greenhouse and the
two tubes in the middle at the back. Use
connector (E) for the two corners at the
back.
10.
Use tube (2) to connect each of the sides
together, use tube (4) to connect the small
gap at the back and use tube (1) to connect
the large gap at the back.
11.
Insert tube (5) into each end of the
connector (J) making the arch of the roof.
12.
Insert each end of the arch into the
connectors (E) at the back of the
greenhouse, do the same for the front and
connect together using tube (2).
Instructions for use
When opening the door to the Stortford
Grow House, always roll up the door and tie
at the top. This will prevent damage to the
door that could occur if the door is not tied
open.
Store in a sheltered location during periods
of extreme weather and high winds.
•
Over exposure of extreme weather may
reduce the life of the cover.
•
Use the metal hooks and rope to help secure
the Grow House in high winds.
Parts and assembly
Metal Hooks (8) Rope (1pc/2m)
