STEP 4:
Position both Front and Back Axles as shown below and insert Frame Adapter into ends of both
Axles. Slide in until you align holes of Frame Adapter with the holes of the Axles. Secure in place using
12x70mm Bolt, Washer, and Lock Nut.
Install Bolts from the bottom.
NOTE: There are 2 sets of holes on the Frame Adapter. Determine the desired length and adjust using holes
accordingly.
STEP 5:
Align holes on the Tongue with the holes on the Tongue Attachment. Secure in place with a 12x80mm
Bolt, Washer, and Lock Nut.
NOTE: A Hitch Pin with Cotter Key is provided for pulling
STEP 6:
Tighten all connections. Check Wheels are at recommended pressure.
NOTE: Periodically check connections to make sure they are tight and secure. Grease any fittings at joints and
Wheels.
CAUTION: Do
NOT
load the Trailer with more than 2200 lbs. Do
NOT
allow children to use the Trailer
unsupervised. This cart is not a toy. Do
NOT
inflate tires more than 35 P.S.I.
Slide Tongue into
groove and secure in
place as shown
