Farmi Forest Corporation CH380HF, Operation, Maintenance And Spare Parts Manual

Page: 20 / 64

CH380HF
20
ROLLER LIFT
NEUTRAL
LIFT
FEED CONTROL
HAND
PEDAL
REV FF
STOP
NO STRESS
PROGRAMMING
PEDAL PLUG
INSPECTION PRIOR TO USE
o Position the chipper on a level, hard
surface.
o Carry out the inspection with the tractor
engine switched off and the chipper disc
fully stopped.
o Check that the disc rotates freely and that
the chipper is free of any foreign objects.
o Check that all protective equipment is
in place and in good condition. Do not
remove any protective shields.
CAUTION!
Check the oil level of the hydraulic oil
reservoir. The oil level eyelet must be
covered.
o
Check the tightness of the hydraulic pump
belt, see ”Maintenance”
o Check the condition and tightness of
hoses and couplings.
CONTROL EQUIPMENT
The feed chute is operated from a remote
control panel either with a manual switch or foot
pedal.
1. STOP
Feed rollers stop rotating.
2. FEED FORWARD = FF
(Right-hand foot pedal)
The feed rollers begin rotating inwards
and wood can be fed into the chipper.
3. REVERSE = REV
(Left-hand foot pedal)
The feed rollers begin rotating outwards
and wood can be removed from the
rollers.The operating switch returns
automatically to the STOP position.
OPERATION