Farmi Forest Corporation CH380HF, Operation, Maintenance And Spare Parts Manual

Page: 28 / 64

CH380HF
28
KNIFE MAINTENANCE
Please refer to the safety instructions. The
chipping disc continues to rotate freely in
the manner of a flywheel after the power
take-off has been disconnected.
Use protective gloves when handling the
knives.
OPENING AND REMOVAL OF THE UPPER
CHAMBER
o Remove the M16 (3 pcs) locking screws.
o Turn the upper chamber onto its side.
o Lock the disc with the locking bolt.
o Remove the feed chute or turn it to the side.
KNIFE REMOVAL FROM
THE KNIFE HOLDERS
1. Remove the knife’s lock nuts (M14).
2. Remove the knife fastening bolts (M14). Turn
the wrench carefully to avoid hand injury by
the knife should the wrench slip.
Locking the disc and removing the lock nuts
Locking
bolt
MAINTENANCE
Opening the upper chamber
Removing the knife fastening bolts