Farmi Forest Corporation CH380HF, Operation, Maintenance And Spare Parts Manual

Page: 24 / 64

CH380HF
24
!
0,1-1
1-10 min
6-60
1-10
6-60 min
1-10 h
10-100 h
1
6
5
4
3
2
8
7
9
10
A
C
B
H
Di
Ac
Bw
3-5 mm
FEED REVERSE
The feed reverse function reduces the amount
of frictional heat generated in the knives and
reduces the power requirement during the acce-
leration phase following No Stress stoppage of
the chipper. When the No Stress sensor stops
the feed rollers the feed reverse function is acti-
vated for a set time, during which the material to
be chipped is ejected from the knives.
SETTINGS AND CONTROL
o The pointer of the uppermost adjustment
screw must point to 0.1-1.
o The actual adjustment is performed
via the middle blue adjustment screw. Position
the pointer between positions 5 – 7. This sets
the feed reverse 50 - 100 mm and releases
the material to be chipped from the knives.
o The pointer of the uppermost adjustment
screw must point at position H.
Only adjust the blue screw!
CAUTION!
Adjusting the feed reverse settings.
No Stress control
The programming button is on the remote control
panel.
LED ON = DISTANCE IS SUITABLE
LED OFF = POSITION SENSOR CLOSER
Fastening rack of the sensor
End plate
Chipper
shaft
Sensor