20
|
27
9 MACHINE TRANSPORT ON ROADS
•
The machine must be equipped with removable shields with marking of contours, functional
lighting, and the board of the rear marking for slow vehicles (according to ECE No. 69).
•
The lighting must be activated during travelling on roads.
•
The tractor must be equipped with a special light device of an orange colour, which must be
activated during travelling on roads.
•
The maximum transport speed during travelling on roads is
20 kph (12,4 mph).
•
During machine transport on roads, the operator must observe the valid laws and decrees that
deal with this topic and which specify the relationships of the tractor axle load depending on
transport speed.
•
The operator is obliged to pay increased attention during transport on roads, due to the
transport dimensions of the machine.
Ban of transport with decreased visibility!
•
The operator must observe the valid regulations for transport on roads (laws, decrees) after
connecting the machine to the tractor, for reason of a change of the axle load. The driving
properties of the set also change depending on the terrain nature, adapt the manner of driving
to these conditions.
•
The operator is obliged to present the machine certificate of roadworthiness as needed,
according to the valid regulations for road traffic (decree, law) (only in the Czech Republic) .
•
The operator is obliged to follow the traffic signs and to comply with the valid road traffic
regulations during transport on roads.
•
The operator is obliged to secure sufficient outlook during reversing from his position of the
tractor driver. In case of insufficient outlook, the operator is obliged to call a competent and
informed person.
Summary of Contents for DV400C/3000N
Page 2: ...2 27 Prepared by Technical Department Farmet a s on 26 10 2018 changes reserved ...
Page 4: ...PREFACE 4 27 IMPORTANT READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE ...
Page 6: ...PREFACE 6 27 ...
Page 14: ...WORK SAFETY LABELS Fig 1 Location of safety labels on the machine 14 27 ...