MACHINE MAINTENANCE AND REPAIRS
MAINTENANCE PLAN
Perform the planned maintenance according to the instructions:
Maintenance Task
Daily
(season)
Once a
week
Before
season
After
season
Time
interval
Electric cables
Check for any damage, replace if needed
Safety measures
Lighting and safety hatched boards
– check
the condition, function and cleanliness
Hazard and safety labels
– check that they are
installed and legible
Machine lubrication plan
Drawbar joint / lifting loop
– grease
Handbrake bolt
– grease or suitable oil
Axle bearings –
grease with Lithium content –
check, refill if needed
After season
Entire machine
•
Treat and clean the machine; do not spray oil or similar agents on the plastic parts
•
Spray the piston-rods of the hydraulic cylinders with suitable anti-corrosion agents
•
Check the tightness of all bolt and plug-in connections (see the torque chart)
•
Check for any damage of the electric cables and replace if needed
Brake system
•
Preserve the anti-freeze fluid for air-brake systems (about 0.1 l ), ethanol-free, before the last ride,
use fluid recommended by the tractor manufacturer.
•
Secure the machine against movement by Scotch blocks.
•
Release the parking brake, release air from the air nozzle and close the brake lines. The service brake
must be released during winter so that is does not get stuck on the brake drum.
Points of lubrication
•
Grease the points of lubrication according to the lubrication plan, use grease
KP2P-20 Likx, under DIN
51 502
!!! PREVENTION means removing the problem according
to the plan, outside the season, without stress and
comfortably before a secondary problem, an accident or
a health hazard arises.
38
|
44
Summary of Contents for DISKOMAT 6,5 PSW
Page 2: ...2 44 Prepared by Technical Department Farmet a s on 26 01 2022 changes reservedy ...
Page 4: ...PREFACE 4 44 IMPORTANT READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE ...
Page 6: ...PREFACE 6 44 ...
Page 15: ...WORK SAFETY LABELS Fig 1 Location of safety labels on the machine 15 44 ...
