35
|
44
MACHINE MAINTENANCE AND REPAIRS
11 MACHINE MAINTENANCE AND REPAIRS
Observe the safety instructions for treatment and maintenance.
•
If it is necessary to weld during the repair and have the machine connected to the tractor, it
must have disconnected supply cables from the alternator and the accumulator.
•
Check the tightening of all screw and other assembly connections at the machine before every
use of the machine, furthermore continuously as needed.
•
Continuously check the wear of the working bodies of the machine, possibly replace these
worn working bodies with new ones.
•
Adjustment, cleaning, and lubrication of the machine may only be performed with the
machine at rest (i.e. the machine is standing and not working).
•
When working on a lifted machine, use suitable support equipment supported at marked
points or at points suitable for that.
•
During adjustment, cleaning, maintenance, and repair of the machine, you must secure those
parts of the machine that could endanger the operator by falling or another movement.
•
For catching the machine during handling using lifting equipment, use only the places marked
with self-adhesive labels with the chain sign.
•
Upon a failure or damage of the machine, immediately turn off the tractor's engine and
secure against restarting, secure the machine against movement
only then you can remove
the failure.
•
During repairs of the machine, use exclusively the genuine spare parts, suitable tools and
protective equipment.
•
Keep the machine clean.
Do not clean bearings with a high-pressure cleaner or direct water stream. The seals and
bearings are not watertight at high pressure.
Summary of Contents for DISKOMAT 6,5 PSW
Page 2: ...2 44 Prepared by Technical Department Farmet a s on 26 01 2022 changes reservedy ...
Page 4: ...PREFACE 4 44 IMPORTANT READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE ...
Page 6: ...PREFACE 6 44 ...
Page 15: ...WORK SAFETY LABELS Fig 1 Location of safety labels on the machine 15 44 ...
