10.1 Adjusting the working depth of the machine
•
Setting of soil processing depth is executed on lifted machine through adding or removing of
distance washers on hydraulic cylinders.
• The same combination of washers (number and force) must be set on all piston rods!!!
•
The chart on the machine specifies the individual operating positions and combinations of the
distance washers.
•
Specified working depths at individual positions are only for information. They may vary
according to particular soil conditions. Required number of distance washers may be added/
removed as needed.
10.2 Adjusting the longitudinal plane of the machine
• Using the TPS arms of the tractor, or the spacers on the piston-rods of the drawbar, set the machine so
that the discs of the front and rear row work at the same depth.
1 – Soil
2 – The machine frame on one level with the soil
3 – TBZ shoulders of the tractor
4 – Setting the depth by the transportation axle and rear rollers
31
|
44
Summary of Contents for DISKOMAT 6,5 PSW
Page 2: ...2 44 Prepared by Technical Department Farmet a s on 26 01 2022 changes reservedy ...
Page 4: ...PREFACE 4 44 IMPORTANT READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE ...
Page 6: ...PREFACE 6 44 ...
Page 15: ...WORK SAFETY LABELS Fig 1 Location of safety labels on the machine 15 44 ...
