30
|
44
10 MACHINE ADJUSTMENT
The operating depth is adjusted in the following way:
1) By setting the depth on the piston rods of the rear rollers
2) By setting the depth of the front part of the machine
a) On the pole
b) On the tracing wheels
Machine adjustment with pole in the tractor shoulders (TPS3-4)
1 – Adjusting depth of tracing wheels
2 – Adjusting pole height by tractor shoulders
3 – Adjusting machine depth by rollers
Adjusting machine with pole in the fixed tractor hitch
1 – Adjusting depth of tracing wheels
2 – Adjusting depth by hydraulic pole
3 – Adjusting machine depth by rollers
Summary of Contents for DISKOMAT 6,5 PSW
Page 2: ...2 44 Prepared by Technical Department Farmet a s on 26 01 2022 changes reservedy ...
Page 4: ...PREFACE 4 44 IMPORTANT READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE ...
Page 6: ...PREFACE 6 44 ...
Page 15: ...WORK SAFETY LABELS Fig 1 Location of safety labels on the machine 15 44 ...
