Farmers Friend Haven HIGH TUNNEL, Assembly And Instruction Manual

Page: 16 / 44

14 14
Well-designed, quality tools and equipment Well-designed, quality tools and equipment | | farmersfriend.com farmersfriend.com
1.
Slide brace band over one side of the gothic section. You may need to use two pairs of pliers
to slightly open brace bands to fit over the bow. Brace band may need to be squeezed back
together.
2.
Position this brace band 5 inches up from the the joint of the bow 5 inches up from the the joint of the bow.
3.
Attach crossbar to brace band with bolt and nut, then tighten down with socket or wrench.
4.
Next, slide brace band on opposite side of gothic section to where
it meets the end of crossbar. Attach and tighten with bolt and
nut. Be sure this brace band also is set at 5 inches from the
Be sure this brace band also is set at 5 inches from the
joint joint. (Compressing or expanding the bow base will allow
you to slide the band up or down to the
desired position.)
5.
Now connect each bow section
together with one self-tapping
screw in the side of each bow joint.
6.
Repeat this on all remaining bows.
S T E P 1 1 S T E P 1 1
Center Bow Assemblies Center Bow Assemblies
fmfr.io/haven/11