6
6
Well-designed, quality tools and equipment
Well-designed, quality tools and equipment
|
| farmersfriend.com
farmersfriend.com
1.
Partially set a self-tapping screw in the swaged section of each post toward the
ends of the tunnel.
2.
Tie two strings to the screws. Take one string
1
over the top of the post
and pull tight down to the screw at the other end. Take the other
2
and wrap around the post 3–4 times so the string ends up on
the outside
outside of the tunnel about 6–7" off the ground, then
run it down tight to the other end.
*
The top string will be your guide for how far to drive
the remaining posts into the ground.
**
The bottom string will be your guide for keeping
the posts in a straight line and also a guide for the
top of your baseboard.
3.
Measure down from the bottom string to the
ground along the length of your tunnel and adjust
the string height until you have at least 5
at least 51/2
1/2" of clear-
" of clear-
ance
ance to ensure the base is above the ground at all points.
Some grading of the dirt might be necessary.
S T E P 3
S T E P 3
Alignment Strings
Alignment Strings
fmfr.io/haven/3
1
2
Corner Post
Self-tapping Screw
Top String
Bottom String
Summary of Contents for Haven HIGH TUNNEL
Page 2: ...Rev 20231004...
Page 42: ......
Page 43: ......
Page 44: ...200 Good Life Way Centerville TN 37033 support farmersfriend com 931 583 0397...