Farmcomp Wile 25, Operating Instructions Manual

Page: 7 / 15

Density for the bale follws ex. 120kg/
m³.
Change density when needed.
Run apperas in display and meter starts
measuring the moisture content.
Moisturereadings shown in percentage
ex, 28.8
After measuring meter turns of itself. The
meter is now ready for the next
measurement.
By doing several measurements from the
sample you insure the average quality of
the bale.
3.4.1 Choosing probe in the meter
The liste of the availalble probes is on
the side of the meter. Choose the right
probe. Ther is also a ”probe 0” ( basic
scale) that wile - service will use.
”Probe – 0” is a basic scale that can
also be used for table scales. When
using Probe – 0 you do an ordinary
measuring and see the identical
mositurereadings from the table. You will
get the tablescales from the
manufacturer or the local wile-dealer,
also see www.wile.fi.
Check the number of the probe when
probe connected by pressing P. You will
shortly see the number of the probe in
the display. Ex, -1-
You can change the probe by pressing F.