display.
–
Moisturereadings
With Wile 251 baleprobe you can check
meters readings/calibrations.
Connect the probe to the meter. Turn on
the meter and coose scale -0-.Hold up
the the probe in the air. Probe W251
needs to be between value 2000 +/- 5,
that meens betwwen 1995-2005.
The biggest reading in the display is
1999 and its followed by 000. 003 means
2003 and 005 means 2005. If wierd
readings occurs , please send the meter
manufactorer or wile-dealer.
6. Battery
The meter works with a 9 volt 6F22
battery or an alkaline battery of the same
format. A battery is included in the
delivery.
LOBAT
-sign at the upper left corner of
the display indicates that the battery
should be replaced
Replace the battery as soon as possible.
If the battery is nearly empty, the LOBAT
sign may not be seen any more.
To replace the battery, open the lid of the
battery compartment, in the bottom of
the meter. Take out the battery and dis-
connect it from the connector and re-
connect the new battery and close the
lid
.
Always first check the battery if you sus-
pect any problems with the operation of
the meter. Please note that the batteries
Summary of Contents for Wile 25
Page 1: ...EN Operating instructions ...
