Farmcomp Wile 25, Operating Instructions Manual

Page: 8 / 15

After this meter shows densitysettings
and run. Meter is ready for measuring.
3.4.2 Density settings
After calculated the density of the bale
set the right density in the meter.
Press p to turn meter on. Meter shows
now probe in use an dthe the density
used last time ex.
120 kg/m3.
You can change density by pressing F
and increase 10 kg/m3 by every press.
(250 is the last value)
4. Processing of the results
4.1 Average calculation
The meter can store and calculate an av-
erage value of several measurements.
After a measurement you can add the
result to the average calculation.
4.1.1 Adding a result to the average
calculation
When the result is shown on the display,
Press
F . Now A will be on the display, the
meter has included the latest result to
the average.
Calculation is ready when A05 and 28,8
are alterning on the display