48
SECTION 10 -- ENGINE -- CHAPTER 1
40. Screw two pins (2) of the appropriate length into
the holes in the crankshaft (3).
41. Extract the engine flywheel (1) so it can be slung
with the lift and put it away in a specific container.
MIF1116A
70
Removing the Crankshaft Rear Seal
(Op. 42. to 45.)
42. Extract the seal, applying tool
380000663
(3)
onto the rear shank (1) of the crankshaft.
43. Perforate the inner seal (5) with a drill bit
(
∅
0.1377 in. (3.5 mm)) through the guide holes
of the tool
380000663
(3), for a depth of
0.1968 in. (5 mm).
44. Secure the tool
380000663
(3) to the seal (5) by
screwing down the screws (2) supplied.
45. Extract the seal (5) by screwing down the screw
(4).
MIF0927A
71
46. Take out the screws (2) and remove the timing
gear box (1), retrieving the injection pump gear.
NOTE:
Note down the assembly position of the
screws (2) as they have different sizes.
MIF1125A
72
Summary of Contents for 90
Page 132: ...132 SECTION 10 ENGINE CHAPTER 1 ...