Farm King Allied 80 Series, Operator And Parts Manual

Page: 21 / 62

Assembly - 80 Series Rear Blade
19
COMPONENT UNLOADING AND
IDENTIFICATION
WARNING
AVOID INJURY OR DEATH
Keep fingers and hands out of pinch points when
assembling the equipment.
WARNING
DO NOT permit bystanders to be in the work area
when unloading and assembling components.
DO NOT work under suspended parts.
Keep away from moving parts.
Always use lifting devices / vehicles, chains
or straps of adequate size and strength when
unloading and assembling components.
Unload the crate(s) and components on a flat level
area of adequate size to assemble the equipment.
IMPORTANT
Unload crate(s) and other components carefully
to prevent damage to any of the components.
NOTE: If any components are damaged, missing
or replacement parts are required, contact
your Farm King Dealer.
Assemble the equipment in the following order
on a flat and level surface:
1. Blade assembly
2. Arm assembly
3. Linkage assembly
Using the packing list, locate and place all
components and hardware in one area. Count the
individual components and verify that you have
received the correct number of components to
fully assemble the equipment.
IMPORTANT
The directions front, left, right, and rear are viewed
as the operator sitting in the operator’s seat with
the equipment hitched to the tractor.