Farm King Allied 80 Series, Operator And Parts Manual

Page: 38 / 62

Maintenance - 80 Series Rear Blade
36
DECAL IDENTIFICATION
Procedure
Remove all portions of the damaged safety sign
(decal).
Thoroughly clean the area with glass cleaner.
Removing all adhesive residue.
Allow the area to dry completely before installing
the new safety sign (decal).
Position the safety sign (decal) in the correct
location.
Remove a small portion of the backing paper on
the safety sign (decal).
Press on the safety sign (decal) where the backing
paper has been removed.
Slowly remove the remaining backing paper,
pressing on the safety sign (decal) as the backing
paper is removed.
Using the backing paper, pressing firmly, move
the backing paper over the entire safety sign
(decal) area.
NOTE: Small air pockets can be pierced with a pin
and smoothed out using the piece of the
backing paper.
IMPORTANT
When replacing safety signs (decals), the
temperature must be above 10° C (50° F).
Figure 14
Apply two to three pumps of grease to the gauge
wheel hubs (Item 1)
[Figure 14] .
Grease daily (or every 8 hours of use).
Figure 15
Apply two to three pumps of grease to the gauge
wheel arm bushings (Item 1)
[Figure 15] .
Grease daily (or every 8 hours of use).
1
2-3
2-3
1
1