Farm King 1342, Operator And Parts Manual, Page: 17 / 194

Safety - 13” Conventional Auger
13
SAFETY INSTRUCTIONS
Safe Operation is The Operator’s Responsibility
Safety Alert Symbol
This symbol with a warning statement means:
“Warning, be alert! Your safety is involved!”
Carefully read the message that follows.
CAUTION
The signal word CAUTION on the machine and
in the manuals indicates a potentially hazardous
situation which, if not avoided, may result in
minor or moderate injury. It may also be used to
alert against unsafe practices.
DANGER
The signal word DANGER on the machine and in
the manuals indicates a hazardous situation which,
if not avoided, will result in death or serious injury.
WARNING
The signal word WARNING on the machine and
in the manuals indicates a potentially hazardous
situation which, if not avoided, could result in
death or serious injury.
IMPORTANT
This notice identifies procedures which must be
followed to avoid damage to the machine.
Safe Operation Needs A Qualified Operator
WARNING
Operators must have instructions before operating
the machine. Untrained operators can cause injury
or death.
For an operator to be qualified, he or she must
not use drugs or alcohol which impair alertness
or coordination while working. An operator who is
taking prescription drugs must get medical advice
to determine if he or she can safely operate a
machine and the equipment.
Understand the written instructions, rules and
regulations:
• The written instructions from Farm King include the
Warranty Registration, Dealer Inspection Report,
Operator And Parts Manual and machine signs
(decals).
• Check the rules and regulations at your location.
The rules may include an employer’s work safety
requirements. Regulations may apply to local driving
requirements or use of a Slow Moving Vehicle (SMV)
emblem. Regulations may identify a hazard such as
a utility line.
Have Training with Actual Operation:
• Operator training must consist of a demonstration
and verbal instruction. This training is given by the
machine owner prior to operation.
• The new operator must start in an area without
bystanders and use all the controls until he or she
can operate the machine safely under all conditions
of the work area.
Know the Work Conditions:
• Clear working area of all bystanders, especially small
children and all obstacles that might be hooked or
snagged, causing injury or damage.
• Know the location of any overhead or underground
power lines. Call local utilities and have all
underground power lines marked prior to operation.
• Wear tight fitting clothing. Always wear safety
glasses when doing maintenance or service.