DTC4500e_User Guide_EN, PLT-01669, Rev. 1.1
Page 56
April 2014
4.9
Image Calibrate Tab
Use the
Image Calibrate
tab to control the position of the printable area in relation to the card.
Use the
Vertical
and
Horizontal
image position controls to adjust the position of the overall print
area to be precisely centered on a card. The maximum value for the
Vertical
and Horizontal
adjustments is ±100 pixels (10 pixels = about .03%, .8mm).
4.9.1
Vertical
Use the
Vertical
adjustment to move the image toward the rear of the printer, if the adjustment is a
positive number. Enter a negative number to move the image toward the front of the printer.
4.9.2
Horizontal
Use the
Horizontal
adjustment to move the image toward the card output side of the printer, if the
adjustment is a positive number. Enter a negative number to move the image toward the input side
of the printer.
