manualshive.com logo in svg

FARGO electronics HDP5000 single-side, User Manual

Share
Download
FARGO electronics HDP5000 single-side User Manual Download Page 38

RESTRICTED USE ONLY 

 

Fargo Electronics, Inc. 

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.4) 

2-22

Printer Components:  Blank Cards (continued)

 

Type Description 

UltraCard 
stock 

Due to the importance of using high-quality blank cards, a factory-approved 
card stock called UltraCard™ is available and recommended for best 
results.  

•

  UltraCard stock has a glossy PVC laminate on top and bottom and is 

optically inspected to provide the cleanest, most scratch and debris-
reduced cards possible.  

•

 

Two types of these cards are available: UltraCard and UltraCard III.

 

•

 

UltraCard stock has a PVC core and offers medium card durability.

 

•

 

Recommended:

  UltraCard III stock has a 40% polyester core and 

offers high durability.

 

Both types of UltraCards produce printed images with a glossy, photo-
quality finish. 

 

Summary of Contents for HDP5000 single-side


















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands